Exported Water Based Silicon Dioxide Liquid For Metal

Silica matting agents are commonly used in water-based resin formulations to achieve a matte or low gloss finish on coated 

surfaces. These matting agents are typically composed of fine particles of amorphous silica that scatter light and reduce the 

gloss of the resin coating.
To incorporate a Silica Matting Agent into a water-based resin system, the following steps can be followed:

1. Select the appropriate type of silica Matting Agent based on the desired level of matting effect and other performance 

requirements. Different grades of silica matting agents are available, offering varying levels of matting and surface smoothness.

2. Determine the optimal dosage level of the matting agent for the specific resin formulation. This can be done through trial and 

error, starting with a small amount and gradually increasing until the desired level of matting is achieved. The recommended 

dosage level is typically provided by the supplier of the matting agent.

Anticorrosion Pigments, Inkjet Receptive Coating, Matting Agent