The main benefits of elastic coatings include:
Silica matting agents are commonly used in elastic coatings to provide a matte or low gloss finish. These agents consist
of fine particles of amorphous silica that scatter light and reduce the reflectivity of the coating surface. This results in a
matte appearance.
The main purpose of using silica matting agents in elastic coatings is to control the gloss level of the coating. Elastic coatings,
such as those used in automotive or furniture applications, are often desired to have a low gloss or matte finish for aesthetic
reasons. Silica matting agents help achieve this desired finish by reducing the reflectivity of the coating surface.
In addition to providing a matte appearance, silica matting agents also offer other benefits in elastic coatings. They can improve
the scratch resistance and abrasion resistance of the coating, as well as enhance the overall durability and performance. Silica
matting agents can also contribute to the anti-blocking properties of the coating, preventing sticking or adhesion between coated
surfaces.
There are different types of silica matting agents available for elastic coatings, including precipitated silica and Fumed Silica. These
agents can be incorporated into the coating formulation during the manufacturing process, usually by mixing them with the other
coating ingredients. The amount of Silica Matting Agent used will depend on the desired gloss level and performance requirements
of the coating.
Overall, silica matting agents are important additives in elastic coatings to achieve a matte finish and enhance the performance
of the coating. They offer a range of benefits, including gloss control, scratch resistance, abrasion resistance, and anti-blocking
properties.
USING TIPS:
* Recommend dosage is 3%-8%. (Please adjust the dosage according to the actual product.) * As different formulations and conditions, suggest the user to test and make sure the dosage before using.
Item | SL-410 | Brand | SKYSIL |
Content of sio2(dry basis) % | ≥99.0 | Porosity ml/g | 1.8-2.0 |
Particle Size(Malvent D50),um | 3.0-3.5 | Whiteness | ≥90.0 |
Loss on drying(105℃,2Hrs) | ≤5.0 | PH | 6.0-7.0 |
Ignition Loss(1000℃,2Hrs),% | ≤7.0 | Oil Absorption g/100g | 270-320 |
Anticorrosion Pigments, Inkjet Receptive Coating, Matting Agent