Silica matting agents are used in a variety of coating applications to provide a matte finish to the surface. They are a
cost-effective solution for manufacturers looking to reduce the glossiness of their products without sacrificing quality or
performance.
These matting agents are made from silica, a naturally occurring mineral that is known for its hardness and chemical
stability. They work by scattering light on the surface of the coating, which reduces its glossiness and gives it a matte
appearance.
Silica matting agents are widely used in industries such as automotive, furniture, electronics, and construction. They are
suitable for both water-based and solvent-based coating systems.
There are several advantages of using silica matting agents for economic coatings:
1. Cost-Effective: Silica matting agents are an economical choice for manufacturers as they are relatively cheap compared
to other matting agents. They also require less amount to achieve the desired matte effect, which further reduces the cost.
2. Versatile: They can be used in a variety of coating systems, including paints, varnishes, lacquers, and inks. They are also
compatible with different types of resins.
3. Easy to Use: Silica matting agents can be easily incorporated into the coating formulation. They do not require any special
equipment or process.
4. High Performance: Despite their low cost, silica matting agents do not compromise on performance. They provide a durable
matte finish that is resistant to scratches and abrasions.
5. Environmentally Friendly: Silica is a natural mineral that is non-toxic and environmentally friendly. It does not contribute to air
pollution or global warming.
In conclusion, silica matting agents are an economical and effective solution for manufacturers looking to provide a matte finish
to their coatings. They offer versatility, ease of use, high performance, and environmental benefits,making them an ideal choice
for economic coatings.
The following specification parameters will be stated on our Certificate of Analysis.
Item Type
| H-300 | H-305
| QX-20 |
Content of sio2(dry basis) %
| ≥98.5
| ≥98.5
| ≥98.5
|
Porosity ml/g
| 1.2-1.4
| 1.2-1.4
| 1.2-1.4
|
Oil Absorption g/100g
| 270-320
| 270-320
| 250-320
|
Particle Size(Malvent,D50),um
| 4.5-5.0 | 5.5-6.0
| 8-10
|
Loss on drying(105℃,2Hrs)
| ≤5.0
| ≤5.0
| ≤5.0
|
Ignition loss(1000℃,2Hrs)
| ≤6.0
| ≤6.0
| ≤6.0
|
Whiteness
| ≥90.0
| ≥90.0
| ≥93.0
|
PH(5% Liquor)
| 6-7
| 6-7
| 6-7
|
Surface treatment
| None
| None
| None
|
Anticorrosion Pigments, Inkjet Receptive Coating, Matting Agent
