SKYELEC Fluoropolymer Chemical Heaters Features & Benefits:
1. Selecting high-quality stainless steel (sus316 or sus304) tube as heaters core and PTFE tube as outside cover. It could
be used in any solution.
2. Low surface watt design (1.5w/cm2) to make sure a long lifetime.
3. Fluoropolymer chemical heaters installation location should pay attention to prevent deposition on its surface or solution too
tight. Sometimes fluoropolymer tubes burnt out causing cold zone is too short (less than 150mm).
4. Fluoropolymer chemical heaters volume size is not allowed to be changed into small and small surface area, or it could make
the heaters surface power oversize and short the lifetime.
5. All fluoropolymer chemical heaters can be ancillary used with temperature sensor (PT100) to make sure a long term lifetime
and keep the equipment safety.
6. Fluopolymer tubes got excellent corrosion-resistant, so its widely used in oxidation of three polishing, chemical gold plating,
chemical silver plating, chemical nickel plating and varieties of high demand solution.
7. Fluoropolymer chemical heaters can be designed into Vertical- shaped, Spiral-shaped, L-shaped, U-shaped, W-shaped,
Coil-shaped, SPD combination-shaped and so on.
8. All fluoropolymer chemical heaters are certified by the CE Certification of EU Market and ISO9001:2008 quality test.
SKYELEC Fluoropolymer Chemical Heaters/PTFE Immersion Heater Applications:
- Aqueous and semi-aqueous cleaning
- Various corrosive fluid
- Evaporation tanks
- Chemical etching
- Chemical mixing
- Phosphatizing
- Rinse tanks
- Anodizing
- Pickling
- Plating
- Dyeing
For our regular specification, please see below:
Power(KW) | Voltage(V) | Heating area(MM) | Vertical height(MM) |
1KW | 220/380 | 180 | According to clients' needs |
2KW | 220/380 | 310 |
3KW | 220/380 | 420 |
4KW | 220/380 | 520 |
5KW | 220/380 | 640 |
6KW | 220/380 | 750 |
Anticorrosion Pigments, Inkjet Receptive Coating, Matting Agent