Quanxu Disperse Dyes Printing Thickener

General Description
QX-310 thickener is an anionic acrylic polymer, serving as coloring carrier in fabric printing with
dispersive dyes on polyester or polyester blended fabrics. Usually, it can take the place of other kinds
of dispersive thickener, like CMT, CMC and CMS at much lower cost.
Technique Data
Appearance Ionic Property Solid Content PH value
Milky white viscous fluid Anionic 72% ±2% 6~7
Property and features
1. Viscous liquid, easy to take out or mix with other auxiliaries.
2. Printing paste is easy to make, it can be ready in a while after high-speed stirring.
3. Post-thickening function allows extra dosage even in case the printing paste is not viscous enough.
Add some thickener when stirring to adjust the consistency of printing paste.
4. The performance of prepared printing paste is very stable, which brings no problem to use the rest
of paste next time.
5. Printing paste complemented by this thickener has good color yield, sharp definition. Even under
special situation, the paste won`t spray out.
6. Economical in use. Comparing to CMT or CMS, EM-630 is very less in application dosage, which
largely reduces processing cost.
7. Easy wash-off, hence gain soft hand feeling.
Usage
1. Measure certain dosage of thickener, add specified dosage of water and stir the mixture with
high-speed emulsion centrifuge. Paste will be shaped in a few minutes.
2. Mix dyestuff and water together. Add thickener, while mixture is stirred with high-speed emulsion
centrifuge, until it reaches required consistency.
3. Recommended dosage: 2-3% subject to dosage of dyes and required printing viscosity.
4. Dispersed dyestuff paste formula for reference

Working procedure of printing
Printing→Drying→High steaming fixation→Wash-off→Rear finishing→Finished products
Packing
60KG or 130 KG net in plastic drum
Storage
Store in ventilated and cool places
Assurance period
1 year after delivery
Notes: Above usages have been proved through practice. But considering practical printing technique,
please choose the right technical process after experiment.

Anticorrosion Pigments, 

Inkjet Receptive Coating, 

Matting Agent