High quality Anode Baskets provide:
- Uniform Anode Area
- Durability
- High Anode Efficiency
- Simple Anode Replenishment
- Constant Current Distribution
- Constant Deposit Thickness
Features:
- Available in Titanium, Zirconium, Stainless Steel and Carbon Steel
- 1/8" x 1" x 4" knife edge standard hooks
- Top reinforcing band
- Expanded micromesh or perforated standard
- Reinforcing straps at 12" intervals
- Solid side channels
- Inverted reinforced bottom
Shape & Size of Baskets:
SKYELEC offers a full line of rectangular and cylindrical Anode Baskets.
Rectangular anode baskets are in standard sizes: 2.5" X 6" and 3" X 12". Baskets with different cross-sectional dimensions
are also available.
Cylindrical anode baskets are available in the standard sizes of 2 1/2" Diameter X Length and 3" Diameter X Length. Baskets
with different cross-sectional dimensions are also available.
Both rectangular and round baskets are available in the following lengths:
Other, non-standard sizes and custom built baskets are also available.
Applications:
1.The conductivity of titanium is not so good that the electric current of the hooks above the solution usually doesn’t exceed
0.24A/ mm² and the current of the hooks under the solution usually doesn’t exceed 1.5A/mm². Otherwise, the hooks will be
heated, which will result in increasing the temperature of the solution, the refrigerating capacity and wasting electric power or
even burn out the plastic tanks. Once the hooks of titanium basket become hot, some measures can be done to improve the
conductivity situation, such as using more titanium baskets and expand the sectional area of hooks.
2. Generally, the hooks and the electrodes don’t touch with each other by plain or circular surface because it will easily cause
bad contact and spot corrosion of the electrodes.
3. In order to prevent the anode slag from flowing out, the opening of the titanium basket should be higher above the solution
level.
4. The bottom of the titanium basket should be 100-150mm higher above the bottom of the tank which for fear that the tank will
be burned out as the electricity is over concentrated in the bottom of the tank.
5. The titanium basket and electrode should be contacted closely, or the anode potential of the titanium basket will rise rapidly
and cause oxygen evolution and chlorine evolution reaction which will damage the titanium basket and oxygenize the additives.
6. In order to prevent coating burrs, the titanium baskets should be coated with anode bags. Since the anode bags are used for
long term without removing, it’s better to use double bags.
7. The anode bag should seal the opening of titanium basket tightly and leave a few centimeters clearance for restoring the
generated anode slag.
Anticorrosion Pigments, Inkjet Receptive Coating, Matting Agent