The main benefits of elastic coatings include:
Injekt Elastic Coating is a type of coating that is designed to provide elasticity and flexibility to surfaces. It is commonly
used to protect and waterproof surfaces such as roofs, walls, and concrete structures.
To enhance the properties of Injekt Elastic Coating, white silicon powder can be added. White silicon powder is a fine
powder made from silicon dioxide, which is known for its excellent water resistance and high temperature resistance.
When added to Injekt Elastic Coating, white silicon powder improves its water repellency, making it more effective in
preventing water penetration. It also increases the coating's resistance to UV radiation, chemicals, and abrasion.
To apply the Injekt Elastic Coating with white silicon powder, the following steps can be followed:
1. Prepare the surface: Clean the surface thoroughly to remove any dirt, dust, or loose particles. Repair any cracks or
damages on the surface before applying the coating.
2. Mix the coating: Follow the manufacturer's instructions to mix the Injekt Elastic Coating with the white silicon powder.
The recommended ratio may vary depending on the specific product, so it is important to refer to the product data sheet
for accurate mixing instructions.
3. Apply the coating: Use a brush, roller, or spray equipment to apply the coating onto the surface. Ensure an even and
consistent application, covering the entire surface area. Apply multiple coats if necessary, allowing sufficient drying time
between each coat.
4. Curing and drying: Allow the coating to cure and dry according to the manufacturer's instructions. This may involve a
specific temperature and humidity requirement, so it is important to follow the recommended curing time for optimal
results.
In conclusion, adding white silicon powder to Injekt Elastic Coating can enhance its water repellency, UV resistance, and
overall durability. Following the proper application process will ensure the coating effectively protects and waterproofs the
desired surface.
USING TIPS:
* Recommend dosage is 3%-8%. (Please adjust the dosage according to the actual product.) * As different formulations and conditions, suggest the user to test and make sure the dosage before using.
| Item | SS-750L | Brand | SKYSIL |
| Content of sio2(dry basis) % | ≥99.0 | Porosity ml/g | 1.8-2.0 |
| Particle Size(Malvent D50),um | 6.0-7.0 | Whiteness | ≥90.0 |
| Loss on drying(105℃，2Hrs) | ≤5.0 | PH | 6.0-7.0 |
| Ignition Loss(1000℃,2Hrs),% | ≤7.0 | Oil Absorption g/100g | 270-320 |
Anticorrosion Pigments, Inkjet Receptive Coating, Matting Agent
